Authorization : Step 1 Setup & Install

Overview > Setup & Install-1 > Setup & Install-2 > Trouble-
Shooting-1		 > Trouble-
Shooting-2		 > Manual
Licensing-1		 > Manual
Licensing-2

Step 1:

Open the application you wish to authorize and click File>Check Authorization.

If you are using an On Center dongle: Verify your dongle is plugged in and that the host ID is an 8 or 10 digit number. If it is longer than 10 digits will need to refer to the Sentinel Driver Installation instructions, then click reauthorize and verify that your host ID has changed to an 8 or 10 digit number and continue to step 2.

dongles.gif

Your dongle looks like one of the two pictured here. If your host ID is correct, this means your dongle is being read correctly. If you are still not authorized, proceed to step 2.